Specifications for the ITP Drip Irrigation Demonstration Trailer
Specifications
Trailer
| 20′ x 8′ Dual Axle | GVWR = 13,900 lbs. |
| 2-5/16″ Bulldog Adjustable 20,000 Coupler | 3/8″ Hi-Test Safety Chains with Grab Hooks |
| Double Two Speed Jacks | 10″ Channel Neck |
| 12″ I-Beam Frame (19 lbs per foot) with Sway Brace | 4″ Structural Channel Cross Members |
| 7″ Structural Channel Side Rails | Rub Rails and Stake Pockets |
| Electric Brakes on Both Axles | Multi-Leaf Springs with Equalizer Suspension |
| 16″ Heavy Duty Wheels | 2″ x 8″ Tongue and Groove Pressure Treated Flooring |
| 2 Loading Legs on the Rear | Toolbox Mounted Between Uprights |
Engine
| Caterpillar 3024 | In-line 4-cylinder, Four Stroke Cycle Diesel Engine |
| 3.30 inch Bore | 3.94 inch Stroke |
| 135.2 cu in displacement | Indirect injection |
| Full load rated engine speed 2800 rpm | Engine skid |
| Reinforced Radiator | Engine Panel with Tachometer and Hourmeter |
| Locking Throttle |
Pump
| Cornell 3 YL | 10″ Impeller Diameter Enclosed |
| 4″ Suction | 3″ Discharge |
| 6 Vanes |
Filter
| Yardney 3616-2A Automatic Carbon Steel Sand Media Filter | 2 – 36″ diameter sand media filter vessels with 16″ vertical side shells |
| Stainless steel underdrain | 4″ Grooved inlet and outlet manifolds |
| 12 V D/C continuous solenoids with 0-15 psi differential switch | Flow rates of 238-350 gpm |
| 3M Schotchkote 134 Fusion Bonded Epoxy Coating |
Acid Injector
| Inject-O-Meter variable rate piston injector |
| Leeson ¾ HP electric motor (12V – 58A) 1800 rpm |
| 1.75″ diameter piston injector |
Sand Media
| 800# ¾” x ½” crushed gravel |
| 1600# of #11 sand, size 0.78 mm with a uniformity coefficient less than 1.5 |
Miscellaneous
| 250 gallon capacity |
| McCrometer in-line propeller meter with pressure gauge |