|
Specifications for the
ITC Drip |
| Trailer: | ||
| 20' x 8' Dual Axle | GVWR = 13,900 lbs. | |
| 2-5/16" Bulldog Adjustable 20,000 Coupler | 3/8" Hi-Test Safety Chains with Grab Hooks | |
| Double Two Speed Jacks | 10" Channel Neck | |
| 12" I-Beam Frame (19 lbs per foot) with Sway Brace | 4" Structural Channel Cross Members | |
| 7" Structural Channel Side Rails | Rub Rails and Stake Pockets | |
| Electric Brakes on Both Axles | Multi-Leaf Springs with Equalizer Suspension | |
| 16" Heavy Duty Wheels | 2" x 8" Tongue and Groove Pressure Treated Flooring | |
| 2 Loading Legs on the Rear | Toolbox Mounted Between Uprights | |
| Engine: | ||
| Caterpillar 3024 | In-line 4-cylinder, Four Stroke Cycle Diesel Engine | |
| 3.30 inch Bore | 3.94 inch Stroke | |
| 135.2 cu in displacement | Indirect injection | |
| Full load rated engine speed 2800 rpm | Engine skid | |
| Reinforced Radiator | Engine Panel with Tachometer and Hourmeter | |
| Locking Throttle | ||
 |
 |
|
| Pump: | ||
| Cornell 3 YL | 10" Impeller Diameter Enclosed | |
| 4" Suction | 3" Discharge | |
| 6 Vanes | ||
 |
 |
|
| Acid Injector: | ||
| Inject-O-Meter variable rate piston injector | Leeson ¾ HP electric motor (12V - 58A) 1800 rpm | |
| 1.75" diameter piston injector | ||
| Filter: | ||
| Yardney 3616-2A Automatic Carbon Steel Sand Media Filter | 2 - 36" diameter sand media filter vessels with 16" vertical side shells | |
| Stainless steel underdrain | 4" Grooved inlet and outlet manifolds | |
| 12 V D/C continuous solenoids with 0-15 psi differential switch | Flow rates of 238-350 gpm | |
| 3M Schotchkote 134 Fusion Bonded Epoxy Coating | ||
 |
||
| Sand Media: | ||
| 800# ¾" x ½" crushed gravel | ||
| 1600# of #11 sand, size 0.78 mm with a uniformity coefficient less than 1.5 | ||
| Miscellaneous: | ||
| 250 gallon capacity | ||
| McCrometer in-line propeller meter with pressure guarge | ||